Infineon’s low-power magnetic switch targets longer shelf life for glucose monitor patches
Infineon says its new magnetic switch draws about 7 nanoamps to reduce battery drain while glucose monitor patches and other devices sit unused.
Infineon Technologies has expanded its XENSIV sensor lineup with a magnetic switch designed to cut standby battery drain in devices such as continuous glucose monitoring patches. The TLV55624-1O draws about 7 nanoamps and can switch power directly to other electronics, which the company says can reduce the number of components manufacturers need.
In a glucose monitoring patch, the switch can turn the device on automatically when it is removed from its applicator, without a smartphone, near-field communication or a separate controller. Infineon says the switch can extend shelf life tenfold in an example using a 6 milliamp-hour silver-oxide battery.
Thomas Cemernek, a senior product manager at Infineon, said glucose monitoring patches need to draw very little power in storage while remaining ready for use. He said combining contactless activation and direct power switching in one component can save circuit board space and help manufacturers build compact, sealed patches.
The switch operates at 1.1 to 3.6 volts and can deliver up to 50 milliamps of continuous output current. It responds to either magnetic pole, and a built-in filter prevents brief magnetic disturbances from changing the output. Infineon is also targeting other battery-powered devices, including hearing aids, smart glasses and medical disposables.
Comments